Copyright © The 19th International Conference on Metal Forming 2022
Powered by
Aconf.org
, One-stop Solutions for Academic Events
Timezone：Asia/Beijing
| S1-1 |
Processes-1@Processes2022-09-13 14:00 ~ 17:50 ZOOM Conference Enter meeting roomTimetable V13 Updated：2022-09-14 11:07:10 |
|||
| Start | End | Duration | ID | Title |
|---|---|---|---|---|
| Chair：Gang Liu， T. Maeno | ||||
| 14:00 | 14:30 | 30 | 195 |
Prevention of Peeling of Al-Si Coated Layer in Hot Stamping Using Corner Thickening by Planar CompressionTomoyoshi Maeno Associate professor/Division of Systems Research, Faculty of Engineering, Yokohama National University
|
| 14:30 | 15:00 | 30 | 12 |
Formability and Forming Process on High Strength Aluminum Alloy Sheet at Cryogenic TemperaturesLiu Wei/Harbin Institute of Technology
|
| 15:00 | 15:15 | 15 | 118 |
Incremental rolling forming process to fabricate surface micro-groovesYanle Li/Shandong University
|
| 15:15 | 15:30 | 15 | 119 |
A novel combined extrusion process of thin-walled tubular part with outer lug bossQiang Wang/North University of China
|
| 15:30 | 15:45 | 15 | 120 |
Construction of extrusion processing window for P/M nickel-based superalloy using deep neural network and its validationHongning Wen/huazhong university of science and technology
|
| 15:45 | 16:00 | 15 | Break | |
| 16:00 | 16:30 | 30 | 136 |
Forming of TA2 tubes by compound spinning-ultrasonic surface rolling: Microstructure and mechanical propertiesXiaoguang Fan/Northwestern Polytechnical University
|
| 16:30 | 17:00 | 30 | 194 |
Research on vibration assisted ploughing-extrusion process in forming μ-scale micro groovesLei Deng 副教授/Huazhong University of Science and Technology
|
| 17:00 | 17:15 | 15 | 7 |
Modelling of ductile damage in single point incremental forming process using enhanced CDM modelKai ZHANG/Shandong University of Science and Technology
|
| 17:15 | 17:30 | 15 | 6 |
Investigation on the thermo-mechanical and tribological properties of hot stamped parts by using laser-implanted tool surfacesStephan Schirdewahn Research Assistant/Institute of manufacturing technology
|
| S2-1 |
Process and System Modelling-1@Process and System Modelling2022-09-13 14:00 ~ 17:50 ZOOM Conference Enter meeting roomTimetable V6 Updated：2022-09-14 11:04:06 |
|||
| Start | End | Duration | ID | Title |
|---|---|---|---|---|
| Chair：Shihong Zhang，Guowei Zhou | ||||
| 14:00 | 14:30 | 30 | 4 |
Analytical Modeling of Surface Roughness of Metal Manufactured Components Based on Building HistoryCARLO BRUNI Dr./UNIVPM
|
| 14:30 | 15:00 | 30 | 210 |
Forming of advanced high strength steels by roll-stamp formingDayong Li/Shanghai Jiao Tong University
|
| 15:00 | 15:15 | 15 | 188 |
Design of a novel experimental profile for the development of a numerical model for extrusion processing of a Magnesium alloyJohn Plumeri/Lehigh University
|
| 15:15 | 15:30 | 15 | 103 |
Numerical simulation of extrusion of FeMnSiCrNi/NiTiNb dissimilar shape memory alloy composite tube based on finite element method and cellular automatonShuyong Jiang/Taiyuan University of technology
|
| 15:30 | 15:45 | 15 | 211 |
Layout Optimization of Robot Forging Unit Based on Genetic Algorithm
Nan Zhang/Beijing Research Institute of Mechanical & Electrical Technology
|
| 15:45 | 16:00 | 15 | Break | |
| 16:00 | 16:30 | 30 | 148 |
Crown predictive model based on SVR algorithm of multi-pass small-strain cold rolled zirconium alloy sheetJianguo Cao/University of Science and Technology Beijing
|
| 16:30 | 17:00 | 30 | 187 |
Comparison of two CDM-based models for necking and fracture limits of metal sheets under hot stamping conditionsRuiqiang Zhang/Imperial College London
|
| 17:00 | 17:15 | 15 | 113 |
A study of cold rolling work roll thermal crown and its influence on strip shape based on FEMYufeng Zhang/Northeastern University（China）
|
| 17:15 | 17:30 | 15 | 107 |
Multi scale modelling of deformation heterogeneities in explosively welded layered sheetsMateusz Mojzeszko/AGH University of Science and Technology
|
| S2-2 |
Process and System Modelling-2@Process and System Modelling2022-09-13 18:30 ~ 21:59 Timetable V6 Updated：2022-09-14 11:04:06 |
|||
| Start | End | Duration | ID | Title |
|---|---|---|---|---|
| Chair：K. Muszka，Qigang Han | ||||
| 18:30 | 19:00 | 30 | 186 |
Metamodeling strategies to simulate the evolution of the substructure formation during hot deformation of Ti-17 alloyFranz Ferraz Miller/Graz University of Technology
|
| 19:00 | 19:30 | 30 | 212 |
Bio-inspired design and flexible manufacturing technology for fiber reinforced compositesQigang Han/Jilin University
|
| 19:30 | 19:45 | 15 | 192 |
Crystal plasticity finite element simulation of micro deep drawing of ferritic stainless steel foilsXiaoguang Ma Associate Professor/Taiyuan University of Technology
|
| 19:45 | 20:00 | 15 | 109 |
A flow forming process model to predict workpiece properties in AISI 304LBahman Arian Research Associate/Universität Paderborn
|
| 20:00 | 20:15 | 15 | Break | |
| 20:15 | 20:45 | 30 | 189 |
Optimisation of panel component regions subject to hot stamping constraints using a novel deep-learning-based platformNan Li Senior Lecturer/Imperial College London
|
| 20:45 | 21:00 | 15 | 190 |
Virtual rolling automation and setup calculations for six stands FEM finishing millJoonas Ilmola/University of Oulu
|
| 21:00 | 21:15 | 15 | 213 |
Modelling of recrystallizaiton behvior by Multi-scale Numerical Framework
Shuaifeng Chen/Institute of Metal Research，Chinese Academy of Science
|
| 21:15 | 21:30 | 15 | 214 |
Coupled CA-FE simulation for dynamic recrystallization of magnesium alloy during hot extrusion
Yuying He/Tsinghua university
|
| 21:30 | 21:45 | 15 | 233 |
An accelerated simulation strategy based on multi-mesh method for flow formingYunda Dong/Northwestern Polytechnical University
|
| 21:45 | 22:00 | 15 | 234 |
An efficient simulation strategy for shear spinning based on multi-mesh methodZhuolei Zhai/Northwestern Polytechnical University
|
| S3-1 |
Deformation Mechanics-1@Deformation Mechanics2022-09-13 14:00 ~ 17:50 ZOOM Conference Enter meeting roomTimetable V6 Updated：2022-09-14 11:04:19 |
|||
| Start | End | Duration | ID | Title |
|---|---|---|---|---|
| Chair：Yi Meng， K. Asai（to be confirmed） | ||||
| 14:00 | 14:30 | 30 | 171 |
Research on flow behavior of 30CrMnSiA during current-assisted plane strain compression deformationQinxiang Xia Professor/South China University of Technology
|
| 14:30 | 15:00 | 30 | 179 |
Biaxial tension under bending and compression - development of a new formability test for incremental sheet formingHui Long Professor,/The University of Sheffield
|
| 15:00 | 15:15 | 15 | 52 |
Rheological parameters influence on deformation heterogeneities in uniaxial compression testsLoïc Villié/Ecole de Technologie Supérieure
|
| 15:15 | 15:30 | 15 | 25 |
Constitutive model and forming limit prediction of AA5182-O aluminium alloy sheet in electromagnetic formingWei Liu/Wuhan University of Technology
|
| 15:30 | 15:45 | 15 | 36 |
Processing and performance of electromagnetic deformation combined with heat treatment of 2195 Al-Li alloyJiahui Xu/Huazhong University of Science and Technology
|
| 15:45 | 16:00 | 15 | Break | |
| 16:00 | 16:30 | 30 | 172 |
Multi-scale simulation of deformation and recrystallization of austenitic stainless steels with solidified columnar crystal structuresHuiqin Chen/Taiyuan University of Science and Technology
|
| 16:30 | 17:00 | 30 | 176 |
Characterization of anisotropic hardening of AA3003-OYanshan Lou/Xi'an Jiaotong University
|
| 17:00 | 17:15 | 15 | 41 |
Wall thickness variation in the conventional spinning of metal sheetsPengfei Gao/Northwestern Polytechnical University
|
| 17:15 | 17:30 | 15 | 178 |
CRYSTALLOGRAPHIC ASPECT OF SHEAR BANDS FORMATION IN PURE IRON DEFORMED AT HIGH STRAIN RATESIzabela Mania/Institue of Metallurgy and Materials Science, Polish Academy of Sciences
|
| S3-2 |
Deformation Mechanics-2@Deformation Mechanics2022-09-13 18:30 ~ 21:30 Timetable V6 Updated：2022-09-14 11:04:19 |
|||
| Start | End | Duration | ID | Title |
|---|---|---|---|---|
| Chair：Hui Long，Dongsheng Qian | ||||
| 18:30 | 19:00 | 30 | 160 |
Research and Prospect of Flexible Forming Theory and Technology of Hollow Shaft by Three-roll Skew RollingXuedao Shu Prof/Ningbo University
|
| 19:00 | 19:30 | 30 | 144 |
Estimation of frictional coefficient between tool and specimen in container-less tapered plug penetration testKazuhito Asai/National Institute of Technology, Toyota College
|
| 19:30 | 19:45 | 15 | 47 |
The influence of material model on the prediction of neck development for aluminium alloy sheetLu Hong/Yanshan University
|
| 19:45 | 20:00 | 15 | 30 |
Effects of ultrasonic vibration on mechanical behavior and microstructure evolution of AZ31 magnesium alloy under hot tensile deformationLiao Juan Professor/Fuzhou University
|
| 20:00 | 20:15 | 15 | Break | |
| 20:15 | 20:45 | 30 | 177 |
Micro-Indentation of oxidized low carbon steel to evaluate properties of oxidesClaverie--burgué Victor /MinesParistech
|
| 20:45 | 21:00 | 15 | 51 |
New developments of formability evaluation methods for hot stampingJiaqi Li Research Postgraduat/Imperial College London
|
| 21:00 | 21:15 | 15 | 29 |
Modelling in materials behavior of strength differential effect and yield locus evolution with non-associated flow ruleYao Zhou/Shanghai Jiao Tong University
|
| 21:15 | 21:30 | 15 | 32 |
Prediction of edge crack in magnesium alloy rolling by a modified GTN modelChenchen Zhao/Taiyuan University of Technology
|
| S4-1 |
Manufacuring Mathods-1@Manufacturing Methods2022-09-13 14:00 ~ 17:30 ZOOM Conference Enter meeting roomTimetable V11 Updated：2022-09-14 11:03:23 |
|||
| Start | End | Duration | ID | Title |
|---|---|---|---|---|
| Chair：Xinyun Wang，Mao Zhang | ||||
| 14:00 | 14:30 | 30 | 229 |
Principle and technology for forming in-plane rings from a metal strip
Hongwei Li/Northwestern Polytechnical University
|
| 14:30 | 14:45 | 15 | 77 |
Optimum arrangement of rubber layout for stretch bending method to improve the shape accuracyTakayuki Muranaka/National institute of technology,Fukui college
|
| 14:45 | 15:00 | 15 | 72 |
Research on forming limit of Ni-based superalloy during spinning under complex strain pathGangfeng Xiao/South China University of Technology
|
| 15:00 | 15:15 | 15 | 58 |
Research on densification mechanism of Inconel 718 alloy miniature gear by electric field-assisted sinteringLiyong Ma Dr./Beihang University
|
| 15:15 | 15:30 | 15 | 59 |
Central defects evolution of Ti-6-Al-4V alloy with large area reduction during flat Cross Wedge RollingMingjie SHI PhD student/USTC-University of Science and Technology of China,IMR CAS-Institute of Metal Research, Chinese Academy of Sciences
|
| 15:30 | 15:45 | 15 | 230 |
Prediction and prevention of flange wrinkling defects in conventional spinning of thin-walled parts
Shuwan Chen/Northwestern Polytechnical University
|
| 15:45 | 16:00 | 15 | Break | |
| 16:00 | 16:30 | 30 | 137 |
Short Hot Stamping Process of Ultra-High Strength SteelsJunying Min/Tongji University
|
| 16:30 | 16:45 | 15 | 54 |
Effect of in-situ transverse magnetic field on the fluid flow, microstructure evolution and corrosion resistance of 316L stainless steel fabricated by GMAW-CMTYang Zhong PhD Student/amp,State Key Laboratory of Materials Processing and Die &, Mould Technology, Department of Materials Science and Engineering, Huazhong University of Science and Technology
|
| 16:45 | 17:00 | 15 | 157 |
An application exploration of flexible skew rolling a rail car axleLin Longfei/University of Science and Technology Beijing
|
| 17:00 | 17:15 | 15 | 75 |
Development of a multi-container extrusion method for extruding lightweight wide plates and sheetsWeishu Li PhD Student/Imperial College London
|
| 17:15 | 17:30 | 15 | 74 |
Forgeability characterization of multi-material based Functional Graded Materials manufactured through Friction Stir ConsolidationAbdul Latif PhD Student/University of Palermo
|
| S4-2 |
Manufacuring Mathods-2@Manufacturing Methods2022-09-13 18:30 ~ 21:30 Timetable V11 Updated：2022-09-14 11:03:23 |
|||
| Start | End | Duration | ID | Title |
|---|---|---|---|---|
| Chair：Hongwei Li，Junying Min | ||||
| 18:30 | 19:00 | 30 | 16 |
Titanium Clad Plate Forming: Critical Consideration and How Different it is from Solid Titanium FormingTrushar Parmar Assistant Manager- D/amp, Toubro Ltd.,Heavy Engineering IC, Larsen &
|
| 19:00 | 19:15 | 15 | 57 |
Smart roll forming and its applicationYONG SUN/UESTC
|
| 19:15 | 19:30 | 15 | 156 |
Investigation of the influence of material and sheet thickness on a three-stage process chain for cold forming of micro gears with a module of 0.1 mmMiriam Leicht research assistant/Friedrich-Alexander-Universität Erlangen-Nürnberg
|
| 19:30 | 19:45 | 15 | 69 |
Evaluation on Dimensional Stability of Cf/AZ91D Composite Based on the micro-yield StrengthKang Yun/Northwestern Polytechnical University
|
| 19:45 | 20:00 | 15 | 56 |
A New Dieless Forming Method for Metal Bellows Induced by Local Thermal BucklingTianyin Zhang/Shanghai Jiao Tong University
|
| 20:00 | 20:15 | 15 | Break | |
| 20:15 | 20:45 | 30 | 180 |
Advances on manufacture methods for wide lightweight aluminium stiffened panelsZhe Zhang/Imperial College London
|
| 20:45 | 21:00 | 15 | 78 |
Study of the Deformation Behaviour of the Zn-Al-Mg Coated Steel Sheet aimed for Tubular Products Application.Marcin Kwiecien/AGH Krakow
|
| 21:00 | 21:15 | 15 | 63 |
A straightening process of rotating bending for small and medium-sized shaft and pipe partsQingdang Meng/Yanshan University
|
| 21:15 | 21:30 | 15 | 70 |
Study on twist defect of thin-walled components with asymmetric section in roll formingJiaojiao Cheng/University of Science and Technology Beijing
|
Copyright © The 19th International Conference on Metal Forming 2022
Powered by
Aconf.org
, One-stop Solutions for Academic Events