Copyright © The 19th International Conference on Metal Forming 2022
Powered by
Aconf.org
, One-stop Solutions for Academic Events
Timezone:Asia/Beijing
S4-1 |
Manufacuring Mathods-1@Manufacturing Methods2022-09-13 14:00 ~ 17:30 ZOOM Conference Enter meeting roomTimetable V11 Updated:2022-09-14 11:03:23 |
|||
Start | End | Duration | ID | Title |
---|---|---|---|---|
Chair:Xinyun Wang,Mao Zhang | ||||
14:00 | 14:30 | 30 | 229 |
Principle and technology for forming in-plane rings from a metal strip
Hongwei Li/Northwestern Polytechnical University
|
14:30 | 14:45 | 15 | 77 |
Optimum arrangement of rubber layout for stretch bending method to improve the shape accuracyTakayuki Muranaka/National institute of technology,Fukui college
|
14:45 | 15:00 | 15 | 72 |
Research on forming limit of Ni-based superalloy during spinning under complex strain pathGangfeng Xiao/South China University of Technology
|
15:00 | 15:15 | 15 | 58 |
Research on densification mechanism of Inconel 718 alloy miniature gear by electric field-assisted sinteringLiyong Ma Dr./Beihang University
|
15:15 | 15:30 | 15 | 59 |
Central defects evolution of Ti-6-Al-4V alloy with large area reduction during flat Cross Wedge RollingMingjie SHI PhD student/USTC-University of Science and Technology of China,IMR CAS-Institute of Metal Research, Chinese Academy of Sciences
|
15:30 | 15:45 | 15 | 230 |
Prediction and prevention of flange wrinkling defects in conventional spinning of thin-walled parts
Shuwan Chen/Northwestern Polytechnical University
|
15:45 | 16:00 | 15 | Break | |
16:00 | 16:30 | 30 | 137 |
Short Hot Stamping Process of Ultra-High Strength SteelsJunying Min/Tongji University
|
16:30 | 16:45 | 15 | 54 |
Effect of in-situ transverse magnetic field on the fluid flow, microstructure evolution and corrosion resistance of 316L stainless steel fabricated by GMAW-CMTYang Zhong PhD Student/amp,State Key Laboratory of Materials Processing and Die &, Mould Technology, Department of Materials Science and Engineering, Huazhong University of Science and Technology
|
16:45 | 17:00 | 15 | 157 |
An application exploration of flexible skew rolling a rail car axleLin Longfei/University of Science and Technology Beijing
|
17:00 | 17:15 | 15 | 75 |
Development of a multi-container extrusion method for extruding lightweight wide plates and sheetsWeishu Li PhD Student/Imperial College London
|
17:15 | 17:30 | 15 | 74 |
Forgeability characterization of multi-material based Functional Graded Materials manufactured through Friction Stir ConsolidationAbdul Latif PhD Student/University of Palermo
|
S4-2 |
Manufacuring Mathods-2@Manufacturing Methods2022-09-13 18:30 ~ 21:30 Timetable V11 Updated:2022-09-14 11:03:23 |
|||
Start | End | Duration | ID | Title |
---|---|---|---|---|
Chair:Hongwei Li,Junying Min | ||||
18:30 | 19:00 | 30 | 16 |
Titanium Clad Plate Forming: Critical Consideration and How Different it is from Solid Titanium FormingTrushar Parmar Assistant Manager- D/amp, Toubro Ltd.,Heavy Engineering IC, Larsen &
|
19:00 | 19:15 | 15 | 57 |
Smart roll forming and its applicationYONG SUN/UESTC
|
19:15 | 19:30 | 15 | 156 |
Investigation of the influence of material and sheet thickness on a three-stage process chain for cold forming of micro gears with a module of 0.1 mmMiriam Leicht research assistant/Friedrich-Alexander-Universität Erlangen-Nürnberg
|
19:30 | 19:45 | 15 | 69 |
Evaluation on Dimensional Stability of Cf/AZ91D Composite Based on the micro-yield StrengthKang Yun/Northwestern Polytechnical University
|
19:45 | 20:00 | 15 | 56 |
A New Dieless Forming Method for Metal Bellows Induced by Local Thermal BucklingTianyin Zhang/Shanghai Jiao Tong University
|
20:00 | 20:15 | 15 | Break | |
20:15 | 20:45 | 30 | 180 |
Advances on manufacture methods for wide lightweight aluminium stiffened panelsZhe Zhang/Imperial College London
|
20:45 | 21:00 | 15 | 78 |
Study of the Deformation Behaviour of the Zn-Al-Mg Coated Steel Sheet aimed for Tubular Products Application.Marcin Kwiecien/AGH Krakow
|
21:00 | 21:15 | 15 | 63 |
A straightening process of rotating bending for small and medium-sized shaft and pipe partsQingdang Meng/Yanshan University
|
21:15 | 21:30 | 15 | 70 |
Study on twist defect of thin-walled components with asymmetric section in roll formingJiaojiao Cheng/University of Science and Technology Beijing
|
S4-3 |
Manufacuring Mathods-3@Manufacturing Methods2022-09-14 14:00 ~ 18:00 ZOOM Conference Enter meeting roomTimetable V11 Updated:2022-09-14 11:03:23 |
|||
Start | End | Duration | ID | Title |
---|---|---|---|---|
Chair:Liang Chen,Guofeng Wang | ||||
14:00 | 14:15 | 15 | 62 |
Spinning deformation mechanism of aluminum alloy cylinder with stiffenersYehui Meng/Shanghai Jiao Tong Uni.
|
14:15 | 14:30 | 15 | 191 |
Springback prediction model of Ti-6Al-4V tube warm bending based on JC modified model considering variable temperature fieldLe Wang/Zhejiang University
|
14:30 | 14:45 | 15 | 60 |
Research on Cross Wedge Rolling Forming Technology of Railway AxlesJunSheng XU Axle Process Supervi/TAI YUAN HEAVY INDUSTRY TRANSIT EQUIPMENT CO., LTD.
|
14:45 | 15:00 | 15 | 169 |
Development and Perspectives of Rolling of Rib Stiffened PlateYasir Alfawzan PhD Student/Imperial College London
|
15:00 | 15:15 | 15 | 64 |
High-velocity forming of sheet metals: Electric-pulse triggered energetic materials formingXueyun Xie/Harbin Institute of Technology
|
15:15 | 15:30 | 15 | 55 |
Integrated fabrication and joining of NiAl/TiAl intermetallic by Additive Sintering Hanwei Ning/Harbin Institute of Technology
|
15:30 | 15:45 | 15 | Break | |
15:45 | 16:00 | 15 | 183 |
Investigation on laser removal of oxide film on 2219 aluminum alloy surface under vacuum condition oriented towards additive forgingJiang Guo/Dalian University of Technology
|
16:00 | 16:15 | 15 | 232 |
Precipitation behavior during aging and mechanical properties of Si3N4/6061Al composite processed by sintering and hot extrusionZhigang Li/Shandong University
|
16:15 | 16:30 | 15 | 231 |
On the fatigue crack initiation in metallic sealing rings: from manufacture to service
Pandi Zhao/Northwestern Polytechnical University
|
16:30 | 16:45 | 15 | 67 |
A study on electric pulse treatment of stainless steel constructive forming processTian Han Student/Wuhan University of Technology
|
16:45 | 17:00 | 15 | 182 |
A study of the formability of stainless steel foils during micro deep drawingLing Li Graduate Student/Taiyuan University of Technology
|
Copyright © The 19th International Conference on Metal Forming 2022
Powered by
Aconf.org
, One-stop Solutions for Academic Events